Perbandingan Cbr dan Ucs Tanah Lempung Distabilisasi Pasir dan Semen

The Comparison of the CBR and UCS Clay Stabilized by Using Sand and Cement

Authors

  • Anwar Muda Universitas Muhammadiyah Palangkaraya

DOI:

https://doi.org/10.33084/anterior.v16i1.79

Keywords:

robust free press, clays, stabilization, sand, cement

Abstract

California Bearing Ratio (CBR) is the ratio between load penetration of a substance against a standard material with the depth and penetration of the same speed. While Unconfined Compression Strength (UCS) is the amount of axial load per unit area at the time of the test specimen to collapse or when the axial strain reaches 20%. This study aimed to compare the CBR and UCS clay stabilized sand and cement for the pavement. The results showed that the CBR value increases, the value rises with increasing UCS cement mix. Then when the stabilization of clay with a mixture of 12% sand and 10% cement values obtained UCS at 9.06 kg/cm2 and CBR of 66% thus, stabilization of clay Bukit Rawi qualify for base down the highway because of the value of UCS 9.06 kg/cm2 > UCS 6 kg/cm2 and CBR of 66% > 20%. UCS and CBR rise in value is due to that the addition of semen into adhesive media when it reacts with water. Media adhesive is then solidified and formed a hard mass so it would hold weight.

Downloads

Download data is not yet available.

Author Biography

Downloads

Published

2016-12-01

How to Cite

Muda, A. (2016). Perbandingan Cbr dan Ucs Tanah Lempung Distabilisasi Pasir dan Semen: The Comparison of the CBR and UCS Clay Stabilized by Using Sand and Cement. Anterior Jurnal, 16(1), 84-89. https://doi.org/10.33084/anterior.v16i1.79

Most read articles by the same author(s)