Penggunaan Kapur Padam Sebagai Pengganti Filler Pada Campuran AC-WC
Use of quenched lime as a substitute for fillers in AC-WC mixtures
DOI:
https://doi.org/10.33084/mits.v7i1.682Keywords:
Kapur Padam, AC-WC, MarshallAbstract
Asphalt Concrete-Wearing Course (AC-WC) has been used widely in Indonesia as a surface layer, because of its water-resistant nature and high durability. An essential characteristic of Asphalt Concrete is that its continuous graded aggregate produces a pavement layer with high stability properties. Fillers as fillers in asphalt mixes. In this study, lime was used as a substitute for fillers in the AC-WC mixture. Extinguished lime is a material that passes the no. 200 (0.075 mm), as the primary condition for filler material. The purpose of this study was to determine the Marshall characteristics of the AC-WC mixture using extinguished lime fillers and to assess the performance of the mix and the effect of quenched lime fillers in the AC-WC mixture. The research method was carried out in several stages starting from inspection of 60/70 asphalt penetration, abrasion testing (Los Angeles), screening analysis, aggregate specific gravity testing, Sand Equivalent testing, testing of concrete mixture particular gravity up to testing with Marshall tools. From the results of the study, the use of extinguished filler lime in the AC-WC mixture showed that the use of quenched lime as a filler substitute fulfilled the requirements of stability, flow, VFB, VMA and Marshall Results.
Downloads
References
Ali, Hadi, (2013), Tinjauan Penggunaan Abu Batu Dan Abu Vulkanik Sebagai Filler Terhadap Durabilitas Asphalt Concrete-Wearing Course (AC – WC), Jurnal Rekayasa, Vol 17, No 1, April 2013.
Ali, Syaifullah, (2006) Pengaruh Penggunaan Gabungan Kapur Padam Dan Fly Ash Sebagai Filler Terhadap Kinerja Campuran Lataston Lapis Permukaan, Jurnal Ilmiah Poli Rekayasa Volume1, Nomor 2, Maret 2006 ISSN : 1858-3709, 2006.
Ariawan, I Made Agus, (2013), Karakteristik Campuran Asphalt Concrete – Binder Course (AC-BC) Dengan Menggunakan Asbuton Dan Limbah Bongkaran Bangunan (Batako) Sebagai Pengganti Agregat Halus Dan Filler, TEKNO SIPIL/Volume 11/No.59/Agustus 2013
Badan Standardisasi Nasional, (2008), SNI 1969:2008, Cara Uji Berat Jenis dan Penyerapan Air Agregat Kasar, Jakarta, Indonesia
Badan Standardisasi Nasional, (2008), SNI 2417:2008, Cara Uji Keausan Agregat dengan Mesin Abrasi Los Angeles, Jakarta, Indonesia
Badan Standardisasi Nasional, (1991), SNI 03-2439-1991 Metode Pengujian Kelekatan Agregat terhadap Aspal, Jakarta, Indonesia
Badan Standardisasi Nasional, (1990), SNI 03-1970-1990, Metode Pengujian Berat Jenis dan Penye-rapan Air Agregat Halus, Jakarta, Indonesia
Badan Standardisasi Nasional, (1997), SNI 03-4428-1997, Metode Pengujian Agregat Halus atau Pasir yang Mengandung Bahan Plastik dengan cara Setara Pasir, Jakarta, Indonesia
Badan Standardisasi Nasional, (1996), SNI 03-4142-1996, Metode Pengujian Jumlah Bahan dalam Agregat yang Lolos Saringan Nomor 200 (0.0075 mm), Jakarta, Indonesia
Badan Standardisasi Nasional, (1991), SNI 06-2456-1991, Metode Pengujian Penetrasi Aspal, Jakarta, Indonesia
Direktorat Jenderal Bina Marga, (2010), Petunjuk Pelaksanaan Lapis Aspal Beton (Laston)
Fithra, Herman, (2017), Pengaruh Jumlah Tumbukan Pada Campuran Asphalt Concrete Wearing Course (ACWC) Tambahan Lateks Terhadap Sifat Marshall, Teras Jurnal, Vol.7, No.1, Maret 2017 P-ISSN 2088-0561E-ISSN 2502-1680, 2017.
Kamil, M., Anggraini, R., Suryani, F. M., (2011), The Performance Of Asphalt-Concrete Wearingcourse (Ac-Wc) Mixture By Using Rice Husk Ash As Filler With The Addition Of Asbuton In Asphalt Pen 60/70 As Binder. Proceedings of The Annual International Conference Syiah Kuala University 2011 Banda Aceh, Indonesia, November 29-30, 2011 Volume 1 Number 2, 2011 173, 2011.
Mashuri., Batty, J. F., Listiana, (2013), Pengaruh Penggunaan Kapur Padam Sebagai Bahan Pengisi (Filler) Pada Ketahanan Pengelupasan Beton Aspal Lapis Aus (AC-WC), Mektek Tahun XV No. 2, Mei 2013.
Ngii, Edward, (2008), Perbandingan Kinerja Filler Slag Nikel Dengan Kapur Padaman Dalam Campuran HRS (Hot Rolled Sheet), Metropilar, Volume 6, Nomor 1, Januari 2008.
Saleh, A., Suparma, L. B., (2015), Perancangan Laboratorium Pada Campuran Asphalt Concrete-Binder Course (Ac-Bc) Dengan Menggunakan Aspal Pen 60/70 Dan Zeolit Alam Sebagai Filler, Annual Civil Engineering Seminar 2015, Pekanbaru ISBN: 978-979-792-636-6145, 2015.
Soehartono, Teknologi Aspal Dan Penggunannya Dalam Konstruksi Pekerjaan Jalan, (2010), Jakarta.
Sugiyanto, G., Harmawan, A., and Mulyono, B., (2015), The Characteristics of Asphalt Concrete Binder Course (AC-BC) Mixture with Bottom Ash as Aggregate Substitute, Civil Engineering Dimension, Vol. 17, No. 1, March 2015, 29-37 CED 2015, 17(1), DOI: 10.9744/CED.17.1.29-37 ISSN 1410-9530 print / ISSN 1979-570X online, 2015.
Sukirman, Silvia, (2010), Perencanaan Tebal Struktur Perkerasan Lentur, Bandung: Nova
Tajudin, A. N., Suparma, L. B., (2014), Pemanfaatan Limbah Plastik HDPE Sebagai Agregat Pengganti Pada Campuran Asphalt Concrete – Binder Course (AC – BC), The 17th FSTPT International Symposium, Jember University, 22-24 August 2014 780, 2014
Downloads
Published
How to Cite
Issue
Section
License
All rights reserved. This publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording.
