Perencanaan Peningkatan Jalan Pada Ruas Jalan Oelamasi – Sulamu Kecamatan Fatuleu Kabupaten Kupang Planning For Road Improvements On The Oelamation Road Section - Sulamu, Fatuleu District, Kupang District
Article Sidebar
Main Article Content
Abstract
Road infrastructure as a means of public transportation has an important role in opening up remote and isolated areas, the Oelamasi - Sulamu Road section is one of the road sections located in Oelamasi, Fatuleu District, Kupang Regency, East Nusa Tenggara Province. Which was built in 2015 with a total length of 10 km and a width of 4.5 m and a penetration layer construction type (Lapen). From the results of the road pavement conditions seen visually in the field, the damage that occurred on the Oelamasi - Sulamu STA 0 + 000 - STA 2 + 000 Road section did not experience damage along the road, but the damage that occurred was only at certain points. This road section experienced damage such as holes, subsidence, patches, edge cracks, crocodile skin cracks, longitudinal cracks, wavy and aggregate wear. From the existing problems, it is necessary to repair additional pavement layers (overlay). This study uses the 1987 SKBI Component Analysis method. Based on the results and discussion, the planning of the thickness of the additional layer with the thickness of each layer is as follows: surface layer (HRS - WC) 6.13 cm, surface layer (HRS - Base) 5 cm and aggregate A foundation layer 15 m.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
All rights reserved. This publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording.
References
Aris A.N.M, Simbolan Gerson, Setiadji,H.B,Supriono.(2015). Analisis Perbandingan Perencanaan Tebal Perkerasan Jalan Lentur Menggunakan Beberapa Metode Bina Marga. Jurnal Karya Teknik Sipil. Vol 4 no 4 hal 380-393
Aprilia, F. N. N, Karib W, Moga N, & Siti H., (2015). Perencanaan peningkatan jalan tembus jl. Ambarawa- Jl. Soekarno hatta, Bawen, Semarang, Jurnal Karya Teknik Sipil, Vol. 4, No 1 hal 66 – 82.
Andri A. & Vicky A. Permana., (2022), Perencanaan Perkerasan Lentur Jalan Raya Menggunakan Metode Analisa Komponen SNI 1732-1989-F Ruas Jalan Raya Mulya Sari Kecamatan Pamanukan Sampai Kecamatan Binong Kabupaten Subang Propinsi Jawa Barat, Jurnal Komposit, Vol. 6 No. 1 hal 41 – 51.
Angguningtyas, N. D (2022). Studi Perencanaan Perkerasan Lentur Jalan Labuan – Torombia Kabupaten Buton Utara Sulawesi Tenggara Sta 00+00 – 10.00 dengan menggunakan Metode Manual Desain Perkerasan (MDP) 2017 dan Metode AASHATO 1993, Universitas Islam Malang.
Departemen Pekerjaan Umum Bina Marga. (1987). Petunjuk Perencanaan Tebal Perkerasan Lentur Jalan Raya Dengan Metode Analisa Komponen. Yayasan Badan Penerbit PU, 73(02), 1–41.
Feriko, A. G. (2019). Analisis Kerusakan Jalan Di Ruas Simpang Bereng Bengkel Tumbang Nusa. Jurnal Teknologi Berkelanjutan, Vol 8 No2 hal 77 - 81.
Payung, S. R., Mangontan, R., & Tanje, H. W. (2023). Analisis peningkatan jalan dengan Metode Analisis Komponen pada jalan Kelurahan Sa’dan Malimbong Kabupaten Toraja Utara. Paulus Civil Engineering Journal, Vol 5 No 2 hal 275–283
Petunjuk Teknis No. 013/T/Bt/1995. (1995), Petunjuk Teknis survey dan Perencanaan Teknik jalan Kabupaten., Depertemen PU Direktorat Jenderal Bina Marga
Rival., Martinus A.S., & Shinta N., (2023)., Analisis Perencanaan pada Peningkatan ruas jalan raya Cirebon – sumber (Jl. pangeran cakrabuana) Kabupaten Cirebon., Journal RIGID., Vol 2 No 1 hal 20 - 29
Suci A. K., Yasin M., Ibnu T. H., & Slamet B., (2019), Perencanaan Peningkatan Jalan Pecangaan–Damaran Kabupaten Jepara, Jurnal MoDuluS