Implementasi Kompor Berbahan Bakar Limbah Oli untuk Peningkatan Efisiensi Produksi UMKM Keripik Singkong Al-Fasih di Desa Watugede, Kabupaten Malang Implementation of Waste Oil–Fueled Stove to Improve Production Efficiency of Al-Fasih Cassava Chips MSME in Watugede Village, Malang Regency
Article Sidebar
Main Article Content
Abstract
Cassava Chips Al-Fasih MSME in Watugede Village, Malang Regency, East Java, faced major constraints in the frying process, including the use of a wood-fired stove that produced unstable heat, limited frying capacity, and the absence of standard operating procedures governing the process. These conditions led to low production efficiency and inconsistent frying quality. This community service program aimed to improve process efficiency, production capacity, equipment hygiene, and operational order by implementing appropriate technology and developing SOPs for production. The program employed a participatory approach consisting of problem identification, design and implementation of a waste oil-fueled stove; use of a 90 cm-diameter SS304 food-grade stainless steel wok; training; preparation of frying SOPs; and evaluation of the results. The results showed that the technological intervention improved heat stability, shortened frying time by approximately 30%, increased production capacity by at least 30% per frying cycle, and reduced fuel costs by about 40%. In addition, the implementation of SOPs ensured that the frying process no longer depended entirely on operator habits, but instead followed more measurable temperature and time parameters. Therefore, the integration of appropriate technology and operational standardization proved effective in improving process efficiency, the consistency of cassava chip quality, and production order in food-based MSMEs.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Any article on the copyright is retained by the author(s).
- Author grant the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share work with acknowledgment of the work authors and initial publications in this journal.
- Authors are able to enter into a separate, additional contractual arrangements for non-exclusive distribution of published articles of work (eg, post-institutional repository) or publish it in a book, with acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their websites) prior to and during the submission process, as can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
References
Aini, A., Safitri, E., Majalina, G., Abidin, M., & Khoiriawati, N. (2024). Analisis Peluang dan Tantangan Teknologi Terhadap Pemberdayaan UMKM di Indonesia. SENTRI: Jurnal Riset Ilmiah, 3, 2564–2571. https://doi.org/10.55681/sentri.v3i5.2842
Amirah Khairi, U., Hasibuan, N., Zidan Riza Pratama, A., & Islam Negeri Sumatera Utara, U. (2024). Strategi Pemasaran dan Posisi Target Sebagai Kunci Keberhasilan Bisnis. Jurnal Masharif Al-Syariah: Jurnal Ekonomi Dan Perbankan Syariah, 9(1), 9–17. https://doi.org/10.30651/jms.v9i1.21424
Ardhiyansyah, A., Heliani, H., Riany, M., Harahap, D., Rosyidah, D., Ashidiqy, A., & Juniansyah, M. (2025). Pendampingan Penyusunan Strategi Pemasaran Berbasis Komunitas bagi Petani. Sciences Du Nord Community Service, 2, 39–45. https://doi.org/10.71238/sncs.v2i01.73
Khairunnisa, N., Firmansyah, R. A., & Hidayat, K. (2024). Characterization of physical attributes of cassava chips in different frying conditions. IOP Conference Series: Earth and Environmental Science, 1338(1). https://doi.org/10.1088/1755-1315/1338/1/012031
Kusnadi, A., Djafar, R., & Mustofa, M. (2020). Pemanfaatan Oli Bekas Sebagai Bahan Bakar Alternatif Kompor Yang Ramah Lingkungan. Jurnal Teknologi Pertanian Gorontalo (JTPG), 5, 49–55. https://doi.org/10.30869/jtpg.v5i2.681
Mangalla, L. K., Sisworo, R. R., & Pagiling, L. (2023). Perbaikan Kualitas Energi Biomassa Kayu Jati Menggunakan Torefaksi Microwave Untuk Produksi Bioarang. TEKNIK, 44(1), 15–22. https://doi.org/10.14710/teknik.v44i1.48278
Pratama, A., Basyirun, B., Atmojo, Y. W., Ramadhan, G. W., & Hidayat, A. R. (2020). Rancang Bangun Kompor (Burner) Berbahan Bakar Oli Bekas. Mekanika: Majalah Ilmiah Mekanika, 19(2), 95. https://doi.org/10.20961/mekanika.v19i2.42378
Rahmah, M., & Ibrahim, H. (2023). Strategi Pemasaran untuk Meningkatkan Daya Saing Produk dalam Perdagangan Internasional. Jurnal Minfo Polgan, 12, 412–2417. https://doi.org/10.33395/jmp.v12i2.13281
Rusli, T., Boari, Y., Amelia, D., Rahayu, D., Setiaji, B., Suhadarliyah, Syarfina, Ansar, Syahruddin, Amiruddin, & Yuniwati, I. (2024). Pengantar Metodologi Pengabdian Masyarakat. https://doi.org/10.61132/jukerdi.v1i4.261
Satriananda, Atthariq, & Azhar. (2025). Inovasi Kompor Oli Bekas sebagai Pengganti Kayu Bakar untuk Produksi Garam Tradisional yang Efisien dan Ramah Lingkungan. Jurnal Vokasi, 9(1), 1–11. http://dx.doi.org/10.30811/vokasi.v9i1.6075
Setyono, A. E., & Kiono, B. F. T. (2021). Dari Energi Fosil Menuju Energi Terbarukan: Potret Kondisi Minyak dan Gas Bumi Indonesia Tahun 2020 – 2050. Jurnal Energi Baru Dan Terbarukan, 2(3), 154–162. https://doi.org/10.14710/jebt.2021.11157
Sofi’i, Y. K., Saifullah, A., Hendaryati, R. H., Sudarman, S., Yuliana, R., Reynaldi, A., Sukroni, M., & Nugroho, W. S. (2023). Peningkatan Kapasitas Bahan Pakan Ternak Bebek di UMKM Ternak Bebek Junrejo Batu Jawa Timur. PengabdianMu: Jurnal Ilmiah Pengabdian Kepada Masyarakat, 8(5), 773–780. https://doi.org/10.33084/pengabdianmu.v8i5.5152
Sofi’i, Y. K., & Sudarman, S. (2022). Dissemination of oil draining machine technology for MSMEs Cassava Chips Maju Jaya Singosari, Malang Regency. Community Empowerment, 7(6), 1006–1012. https://doi.org/10.31603/ce.6555
Sofi’i, Y. K., Sudarman, S., Hendaryati, R. H., & Nugroho, W. S. (2023). Production and marketing process assistance of MSMEs Dedy’s Babies Wear. Community Empowerment, 8(5), 723–727. https://doi.org/10.31603/ce.8477
Sofi’i, Y. K., Sudarman, S., & Nugroho, W. S. (2024). Peningkatan Daya Saing UMKM Mimi Roti melalui Penerapan Teknologi Pengemasan dan Pemasaran Digital. PengabdianMu: Jurnal Ilmiah Pengabdian Kepada Masyarakat, 9(5), 906–911. https://doi.org/10.33084/pengabdianmu.v9i5.6665
Thamrin, H., Saraswati, E., & Handoko, A. I. (2025). Pengembangan Komunikasi Komunitas Lokal: Strategi Dan Branding Pemasaran Untuk UMKM Di Kecamatan Sirah Pulau Padang Kabupaten Ogan Komering Ilir. Jurnal SEMAR (Jurnal Ilmu Pengetahuan, Teknologi, Dan Seni Bagi Masyarakat), 14(1), 31–40. https://doi.org/10.20961/semar.v14i1.93617